tel :+86-18059296519

E-mail : [email protected]

Italiano Italiano

CHE COSA STA CERCANDO?

Tubo in acciaio inossidabile 304 Tubo con cappuccio terminale saldato Flangia del tubo all'ingrosso Aste metalliche rotonde qualificate

Prodotti

Casa Prodotti Raccordi per tubi Riduttore

Eccentric Reduce

The Eccentric Reducer is available in 304 stainless steel alloys. Tangents are provided on both sides to facilitate welding. Buttweld ends to accommodate the joining of two separate tube lines of different sizes. Stainless steel material is resistant to corrosion and can withstand high temperatures. This product is manufactured in accordance with 3A standards for process line applications including food & beverage industries.

Misurare :
Seamless Type: 1/2"-20”(DN15-DN500) Welded Type: 1/2”-48”(DN15-DN1200)
Standard :
GB/T12459, GB/T13401, SH3408, SH3409; ASMEANSI B16.9, B16.28, ASTMA403, MSS SP-43; DIN 2605, DIN2609, DIN2615, DIN2616; JIS B2311, JIS B2312, JIS B2313
Materiale :
Nickel Alloy, Duplex Steel, Stainless Steel

Informarsi ora

CATEGORIE DI PRODOTTO

Come possiamo aiutarti

tel : +86-18059296519

Whatsapp : +8618059296519

E-mail : [email protected]

CONTATTACI

Nuovi Prodotti

Tappo terminale SUS304 di alta qualità-EC1
PER SAPERNE DI PIÙ

Dettagli del prodotto

Eccentric Reduce

Feature

The pipe reducer is one of the pipe fittings, which is used for connecting two pipes with varying diameters. A pipe reducer is used to change rate of fluids the flow through. Reducers are usually made by reducing pressing processes, or by expanding pressing processes or by both reducing and expanding pressing processes together, and we can also adopt stamping processes for reducers with some specifications. Reducers are categorized into types, Eccentric and Concentric Reducer. The pipe reducers are widely available in a various materials as per the demands of its applications and industries and also available in different dimensions too.

Pipe reducer help to connect large diameter pipe with small diameter pipe.
Noise and vibration are reduced by using these type of reducers.
These reducers need a limited amount of setup space.
The eccentric reducer absorbs sounds generated by the pipe wall as well as fluid tolerated.
This reducers have the lowest amount of turbulence entrapment.

A reducer allows for a change in pipe size to meet flow requirements or to adapt to existing piping. The length of the reduction is usually equal to the average of the larger and smaller pipe diameters. Reducers are typically concentric, but eccentric reducers can be used to maintain the same top-of-pipe or bottom-of-pipe level.

Standard：	GB/T12459, GB/T13401, SH3408, SH3409; ASMEANSI B16.9, B16.28, ASTMA403, MSS SP-43; DIN 2605, DIN2609, DIN2615, DIN2616; JIS B2311, JIS B2312, JIS B2313
Certification：	SGS，ISO，ROHS
Size：	Seamless Type: 1/2"-20”(DN15-DN500) Welded Type: 1/2”-48”(DN15-DN1200)
Wall thickness：	Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
Radius：	LR/long radius/R=1.5D,SR/Shrot radius/R=1D, various radius: 3D,4D,5D,6D,7D,10D,20D etc.
End：	Bevel end/BE/buttweld
Camber：	30º 40º 60º 90º 180º,etc
Polish：	mirror polish,dull/matte polish,sub-light,240 girt,400 grit
Surface：	Pickled,sand blasting, rolling blast,brighten,matt polished,mirror polished,vanished,shinning
Process Method：	Forged / Casting
Price terms：	FOB,CFR,CIF,EXW all acceptable
Grade：	201，304,304L，309，309S，310S，316,316L，316Ti，317L，321,347H，409,409L，410，410S，420（420J1，420J2），430，436，439，441，444，446 ，2205，2207，etc
Grade：	1.4301, 1.4307, 1.4541, 1.4401, 1.4404 ,1.4571, 1.4438, 1.4539, 1.4547, 1.4529, 1.4562, 1.4410, 1.4878, 1.4845, 1.4828, 1.4876,2.4858, 2.4819，etc

Technical parameters

Norminal Pipe size DN	Outside Diameter at Bevel				End to End L
	D1		D2
	Series A	Series B	Series A	Series B
20×15	26.9	25	21.3	18	38
25×20	33.7	32	26.9	25	51
25×15	33.7	32	21.3	18	51
32×25	42.4	38	33.7	32	51
32×20	42.4	38	26.9	25	51
32×15	42.4	38	21.3	18	51
40×32	48.3	45	42.4	38	64
40×25	48.3	45	33.7	32	64
40×20	48.3	45	26.9	25	64
40×15	48.3	45	21.3	18	64
50×40	60.3	57	48.3	45	76
50×32	60.3	57	42.4	38	76
50×25	60.3	57	33.7	32	76
50×20	60.3	57	26.9	25	76
65×50	76.1(73)	76	60.3	57	89
65×40	76.1(73)	76	48.3	45	89
65×32	76.1(73)	76	42.4	38	89
65×25	76.1(73)	76	33.7	32	89
80×65	88.9	89	76.1(73)	76	89
80×50	88.9	89	60.3	57	89
80×40	88.9	89	48.3	45	89
80×32	88.9	89	42.4	38	89
90×80	101.6	-	88.9	-	102
90×65	101.6	-	76.1(73)	-	102
90×50	101.6	-	60.3	-	102
90×40	101.6	-	48.3	-	102
90×32	101.6	-	42.4	-	102
100×90	114.3	-	101.6	-	102
100×80	114.3	108	88.9	89	102
100×65	114.3	108	76.1(73)	76	102
100×50	114.3	108	60.3	57	102
100×40	114.3	108	48.3	45	102
125×100	139.7	133	114.3	108	127
125×90	139.7	-	101.6	-	127
125×80	139.7	133	88.9	89	127

TAG CALDI : Eccentric Reducer threaded Eccentric Reducer Butt Welded Seamless Eccentric Reducer 304 Welded Eccentric Reducer

lasciate un messaggio

Se sei interessato ai nostri prodotti e vuoi conoscere maggiori dettagli, lascia un messaggio qui, ti risponderemo il prima possibile.

prodotti correlati

Riduttore concentrico in acciaio inossidabile 304-EC3

Il riduttore concentrico è disponibile nelle leghe di acciaio inossidabile 304. Su entrambi i lati sono presenti tangenti per facilitare la saldatura. Estremità saldate di testa per consentire l'unione di due linee di tubi separate di diverse dimensioni. Il materiale in acciaio inossidabile è resistente alla corrosione e può resistere alle alte temperature. Questo prodotto è realizzato in conformità con gli standard 3A per applicazioni in linee di processo, comprese le industrie alimentari e delle bevande.

Riduttore concentrico in acciaio inossidabile 304-EC2

Riduttore concentrico in acciaio inossidabile 304-EC1

Concentric Reducer

The Concentric Reducer is available in 304 stainless steel alloys. Tangents are provided on both sides to facilitate welding. Buttweld ends to accommodate the joining of two separate tube lines of different sizes. Stainless steel material is resistant to corrosion and can withstand high temperatures. This product is manufactured in accordance with 3A standards for process line applications including food & beverage industries.